Where to Buy U-POL 0820V-GUN Black URETHANE Truck Bed Liner Kit With 726 Gun

U-POL 0820V-GUN Black URETHANE Truck Bed Liner Kit With 726 GunBuy U-POL 0820V-GUN Black URETHANE Truck Bed Liner Kit With 726 Gun

U-POL 0820V-GUN Black URETHANE Truck Bed Liner Kit With 726 Gun Product Description:



  • Tough, durable 2 pack urethane coating
  • Enough material to re-spray the largest truck beds
  • Dries rapidly & UV resistant Scratch & stain resistant
  • Protects against rust, corrosion salt, damp & extreme temperatures
  • Waterproof, flexible, helps deaden sound & vibrations

Product Description

Easy to use - simply fill - shake - shoot Choice of pot life/dry times controlled by the speed of the hardener Enough material to re-spray the largest truck beds Dries rapidly & UV resistant Scratch & stain resistant Protects against rust, corrosion salt, damp & extreme temperatures Waterproof, flexible, helps deaden sound & vibrations Apply with shutz gun, roller or brush to obtain different textures Provides excellent adhesion

Customer Reviews

Most helpful customer reviews

14 of 14 people found the following review helpful.
5Pro quality DIY
By C. J. Brown
My son and I bought a Raptor kit (with gun) to line the entire tub of a 2000 Jeep Wrangler. We took our time and removed everything from the interior we could, then worked on and off for about a week scuffing the interior with 3M stripping pads and an abrasive nylon cup brush on a drill. For application, We chose noon on a sunny day with the temperature at about 70. First we wiped down the areas to be coated with xylene, then acetone. The Raptor gives off strong fumes when it being applied, so we did the spraying outdoors in a very light breeze. We used my 5hp 20 gallon compressor and it kept up fine, with the regulator set at 50 psi. We used the first two bottles to achieve full coverage, then used the third bottle to touch up areas we had missed and to put extra coats on high-wear areas. We have one bottle left over to do touch ups or repairs in the future if necessary. The surface was dry to the touch in an hour, so we then began removing the masking tape and were elated to see that we were left with excellent sharp edges. We we were able to begin gentle reassembly of the interior within 3 hours of completion. The Jeep was returned to use the next day with towels in the floorboards to protect them while the cure completed. My advice is to be patient on the prep, mask carefully against overspray, and consider borrowing or buying an organic vapor respirator, especially if you are going to have to apply the liner inside a garage or shop. We did not have respirators, but really wished we did. We did this job for about $150 total and couldn't be happier with the results.

8 of 8 people found the following review helpful.
5Awesome product
By ScottA
5 stars all day long. Those who gave less is due to their inability to read product details.Here ill make it easy 1: Make sure you buy the kit that includes the spray gun (its only $14 more, no big deal) 2: Make sure you have access to an air compressor or own one (larger the better) you get better coverage & it doesnt clump when you have adequate pressure.3: Prep work takes the longest, a 6' bed will take no more than 30min to spray.I am very happy w the product & would buy it again & recommend to any & every do-it-yourselfer!

8 of 9 people found the following review helpful.
3Great Product
By ChadWilliam1
Stuff works very well and looks excellent. Prep work takes a long, long, long time but it sprays easily. Insturctions could use more details on how to prep properly. I couldn't be happier with the product.Updated review.This is a light to medium duty bedliner. I sanded the entire bed with 160 grit sand paper and several different grades of scuff pads. My dad did it twice and i did it a third time to make sure nothing was missed. Then my brother went over it a fourth time. I then washed it out with water and wiped it out with a towel. We then waited an hour to let it dry and blew it out with an air line. I sprayed all the body filler and bare spots with the Upol acid etch primer. I feel like i did the best I could on prep.After about a month I slid my floor jack in and it took out a few chunks of it. I then noticed a few other spots where it has chipped. I ordered another bottle off ebay for touch up. If you are throwing rocks and heavy stuff in your bed pay for a Line-x. If you are just putting groceries and lumber, this product will work fine.

See all 17 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy U-POL 0820V-GUN Black URETHANE Truck Bed Liner Kit With 726 Gun